Student page

 

Master's Thesis
2022
Name Title
Ryumon Okada Microscopic analysis of hydrogen-induced damage in palladium polycrystals
Ryota Okuda High cycle fatigue properties of aluminum alloys containing solid solution magnesium
2021
Name Title
Yusuke Morii Damage analysis of palladium polycrystals due to hydrogen absorption
Yusuke Kawabata Tensile Fracture Properties of 7000 Series Aluminum Alloys in Salt Water
2020
Name Title
Kazutoshi SAKAMOTO Time-dependent peeling crack generation strength rule from the interface edge of dissimilar materials (effect of material)
Tomoyuki KOZAWA High temperature creep crack growth mechanism analysis of single crystal Ni-based superalloys
2019
Name Title
Hiroki NAKANO High cycle fatigue properties of Al-Cu alloy
Kaname KISHIMOTO Evaluation of interfacial crack initiation strength from free-edge in micro-scale Si/Cu components －effect of interface free-edge shape and environment－
Kenta WADA Time-dependent crack initiation strength from interface edge of adhesive joints(Epoxy/SUS)
2018
Name Title
Kosuke INOUE Study on time-dependent delamination crack initiation strength from interface edge (investigated of Epoxy/SUS joint)
Masaki KASHIHARA Analysis of high temperature fatigue crack propagation mechanism of Ni-based superalloy
Jun KURIHARA High cycle fatigue characteristics of 6000 series aluminum alloy which contains strain aging ability (influence of temperature)
2017
Name Title
Itaru ASHIDA Evaluation of interfacial crack initiation strength from free-edge in micro-scale Si/Cu components (effect of hydrogen)
Ryosuke KURIKI High-cycle fatigue properties of A6061-T6-based new Al alloy (effect of environment）
2016
Name Title
Kazuya AIHARA Evaluation of strength against interfacial crack initiation from free-edges in Si/Cu micro-componets（effect of free-edge shape）
Ryo ASANO Evaluation of grain boundary hydrogen embrittlement using a single grain boundary specimen
Shusaburo KITA High-cycle fatigue strength properties of A6061-T6-based new Al alloys (effect of temperature）
Hironari NISHIOKA Investigation on the influence of solute Mg on static/fatigue strength of precipitation-hardened Al-Cu-Mg alloy
2015
Name Title
Yuji KAWATA High-cycle fatigue strength properties of A6061-T6-based new Al alloys (effect of temperature）
Takuya WADA Gaga-cycle fatigue properties of A6061-T6-based new Al alloy (effect of environment)
2014
Name Title
Hikaru KONDO Study on environmental strength properties of interfaces by micro experiments
Ryota NAKAMICHI High-cycle fatigue properties of A6061-T6-based new Al alloy
2012
Name Title
Keiichi UEDA Study on time-dependent creep crack inititation from interface edge
Hiroaki YOSHITAKE Super high-cycle fatigue properties of new Al alloy with strain aging capability
Student Oral Presentations

Click each year to open a list．

2022

  • Kei TAKEHARA, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO:Evaluation of microscopic damage to palladium polycrystals caused by hydrogen absorption, The 8th Materials WEEK "Materials Symposium" Workshop and Young Student Research Presentation , 2022.10
  • Shintaro FUJII, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: Time-dependent crack growth mechanism of Ni-based superalloys at elevated temperatures, The 8th Materials WEEK "Materials Symposium" Workshop and Young Student Research Presentation, 2022.10
  • Ryumon OKADA, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: Microscopic analysis of hydrogen-induced damage in palladium polycrystals, The Japan Society of Mechanical Engineers Kansai Branch 98 period regular meeting, 2023.3
  • Ryota OKUDA, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: High cycle fatigue properties of aluminum alloys containing solid solution magnesium, The Japan Society of Mechanical Engineers Kansai Branch 98 period regular meeting, 2023.3
  • Keiki KAWANAMI, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: Stress corrosion cracking properties of A7003 alloy sheet in salt water environment, The Japan Society of Mechanical Engineers Kansai Branch 98 period regular meeting, 2023.3
  • Manami MACHIDA, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: Creep Crack Initiation Characteristics of Epoxy Resins with Surface Microdefects, The Japan Society of Mechanical Engineers Kansai Branch 98 period regular meeting , 2023.3
  • Keisuke SHINODA, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: Stress corrosion cracking properties of A7003 alloy sheet in salt water environment, The Japan Society of Mechanical Engineers Kansai Branch 98 period regular meeting/ conference（Mechanical vocation student research presentation session), 2023.3
  • Ryo NAKATA, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO:Fatigue crack initiation and propagation characteristics from small surface defects in ultra-low carbon steels, The Japan Society of Mechanical Engineers Kansai Branch 98 period regular meeting/ conference（Mechanical vocation student research presentation session), 2023.3 ※Best Presentation Award Winner
  • Koyo NAGAI, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: Microscopic analysis of hydrogen-induced damage in palladium polycrystals, The Japan Society of Mechanical Engineers Kansai Branch 98 period regular meeting/ conference（Mechanical vocation student research presentation session) , 2023.3※Best Presentation Award Winner

2021

  • Yusuke KAWABATA, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: Tensile Fracture Properties of 7000 Series Aluminum Alloys in Salt Water, The Japan Society of Mechanical Engineers Kansai Branch 97 period regular meeting (Held online), 2022.3
  • Yusuke MORII, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: Damage analysis of palladium polycrystals due to hydrogen absorption, The Japan Society of Mechanical Engineers Kansai Branch 97 period regular meeting (Held online), 2022.3※Young Outstanding Lecturing Fellow Award
  • Keiki KAWANAMI, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: Tensile Fracture Properties of 7000 Series Aluminum Alloys in Salt Water, The Japan Society of Mechanical Engineers Kansai Student Association 2021 year Graduation Research Presentation Lecture (Held online), 2022.3
  • Kei TAKEHARA, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: Damage analysis of palladium polycrystals due to hydrogen absorption, The Japan Society of Mechanical Engineers Kansai Student Association 2021 year Graduation Research Presentation Lecture (Held online), 2022.3
  • Manami MACHIDA, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: Creep Crack Initiation Characteristics from Micro Surface Defects (Investigation Using Epoxy Resin), The Japan Society of Mechanical Engineers Kansai Student Association 2021 year Graduation Research Presentation Lecture (Held online), 2022.3
  • Shintaro FUJII, Yoshimasa TAKAHASHI, Daisuke KOBAYASHI: Electron microscopic analysis of high temperature creep crack tip in Ni-based superalloys, The Japan Society of Mechanical Engineers Kansai Student Association 2021 year Graduation Research Presentation Lecture (Held online), 2022.3※Best Presentation Award Winner
  • Ryumon OKADA, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: Microscopic Analysis of Hydrogen Storage Damage in Polycrystalline Palladium, The Japan Society of Mechanical Engineers Kansai Branch 97 period regular meeting/ conference（Mechanical vocation student research presentation session)(Held online), 2022.3
  • Ryota OKUDA,Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATOHigh Cycle Fatigue Properties of Aluminum Alloys Containing Solid Solution Mg, The Japan Society of Mechanical Engineers Kansai Branch 97 period regular meeting/ conference（Mechanical vocation student research presentation session)(Held online), 2022.3 ※Best Poster Award Winner

2020

  • Yusuke KAWABATA, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO:Effect of Mg addition on high-cycle fatigue properties of 7000 series aluminum alloy, Annual Meeting of the Japan Society of Mechanical Engineers 2020 , 2020.9
  • Yusuke MORII, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: Delamination initiation criterion of Si/Cu micro-components-effect of interface edge shape-, Annual Meeting of the Japan Society of Mechanical Engineers 2020, 2020.9
  • Kazutoshi SAKAMOTO, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: Examination of time-dependent peeling crack generation intensity law from the Epoxy/SUS interface edge, The Japan Society of Mechanical Engineers Kansai Branch 96 period regular meeting (Held online), 2021.3
  • Tomoyuki KOZAWA, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: Detailed observation of high temperature creep crack tip in Ni-based superalloy, The Japan Society of Mechanical Engineers Kansai Branch 96 period regular meeting (Held online), 2021.3
  • Yusuke KAWABATA, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: Fatigue limit characteristics of high-strength aluminum alloy-Environmental impact-, The Japan Society of Mechanical Engineers Kansai Branch 96 period regular meeting (Held online), 2021.3
  • Ryota OKUDA, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: Fatigue limit characteristics of high-strength aluminum alloy-Environmental impact-, The Japan Society of Mechanical Engineers Kansai Student Association 2020 year Graduation Research Presentation Lecture , 2021.3

2019

  • Hiroki NAKANO, Sho TSUJITA, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH: Effect of temperature on high cycle fatigue strength of Al-Cu T4 alloy , M&M 2018 Material Mechanics Conference, 2019.11
  • Tomoyuki KOZAWA, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO,
    Takahiro SHIKAMA（Kobe Steel, Ltd.）, Hiroshi Noguchi（KYUSHU University）: Small fatigue crack growth characteristics of Al-Mg-Si system alloy with Strain Aging, M&M 2018 Material Mechanics Conference, 2019.11
  • Kaname KISHIMOTO, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: Evaluation of interfacial crack initiation strength from free-edge in micro-scale Si/Cu components －effect of interface free-edge shape and environment－, The Japan Society of Mechanical Engineers Kansai Branch 95 period regular meeting/ conference(Research discussion session), 2020.3
  • Kenta WADA, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: Time-dependent crack initiation strength from interface edge of adhesive joints(Epoxy/SUS), The Japan Society of Mechanical Engineers Kansai Branch 95 period regular meeting/ conference(Research discussion session), 2020.3
  • Yusuke KAWABATA, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO:High-cycle fatigue properties of Al-Zn-Mg alloy (effect of Mg content), The Japan Society of Mechanical Engineers Kansai Student Association 2019 year Graduation Research Presentation Lecture , 2020.3
  • Yusuke MORII, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: Crack initiation strength evaluation from interfacial free-edge in micro-scale components -effect of interface free-edge shape-, The Japan Society of Mechanical Engineers Kansai Student Association 2019 year Graduation Research Presentation Lecture , 2020.3

2018

  • Masaki KASHIHARA, Yoshimasa TAKAHASHI, Daisuke KOBAYASHI: Detailed Observation of High-temperature Fatigue Crack Tips in a Ni-based Superalloy, Annual Meeting of the Japan Society of Mechanical Engineers 2018 , 2018.9 ※The Outstanding Award Winner from the Power and Energy Systems Division of JSME
  • Kenta WADA, Yuki MAENO, Kosuke INOUE, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: Time-dependent delamination crack initiation from bonded epoxy/ SUS interface edge (effect of edge shape), Annual Meeting of the Japan Society of Mechanical Engineers 2018 , 2018.9
  • Hiroki NAKANO, Sho TSUJITA, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: Evaluation of high-cycle fatigue properties of Al-Cu alloy (effect of temper condition), The Japan Society of Mechanical Engineers, M&M 2018 Material Mechanics Conference , 2018.12
  • Kosuke INOUE, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: Study on time-dependent delamination crack initiation strength from interface edge, The Japan Society of Mechanical Engineers Kansai Branch 94 period regular meeting/ conference（Research discussion session）, 2019.3
  • Kaname KISHIMOTO, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: Study on experimental method of interfacial crack initiation strength evaluation from free-edge in micro-scale components, The Japan Society of Mechanical Engineers Kansai Branch 94 period regular meeting/ conference
    （Mechanical vocation student research presentation session ), 2019.3
  • Kenta WADA, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: Time-dependent delamination crack initiation from interface edge of metal/creep – body bond, The Japan Society of Mechanical Engineers Kansai Branch 94 period regular meeting/ conference（Mechanical vocation student research presentation session), 2019.3
  • Kazutoshi SAKAMOTO, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: Strength of time-dependent delamination crack initiation from Epoxy/ SUS bonded interface edge, The Japan Society of Mechanical Engineers Kansai Student Association Heisei 30 Graduation Research Presentation Lecture , 2019.3
  • Tomoyuki KOZAWA, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: High-cycle fatigue properties of A6061-T6-based new Al alloy (effect of defect size) , The Japan Society of Mechanical Engineers Kansai Student Association Heisei 30 Graduation Research Presentation Lecture , 2019.3
    ※Best Presentation Award Winner

2017

  • Kosuke INOUE, Tsubasa TADA, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: Time-dependent Crack Initiation Strength Property of Epoxy/SUS adhesive Joints, Annual Meeting of the Japan Society of Mechanical Engineers 2017 , 2017.9
  • Itaru ASHIDA, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: Evaluation of interfacial crack initiation strength from free-edge in micro-scale Si/Cu components (effect of hydrogen) , The Japan Society of Mechanical Engineers Kansai Branch 93 period regular meeting/ conference（Research discussion session）, 2018.3
  • Ryosuke KURIKI, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: High-cycle fatigue properties of A6061-T6-based new Al alloy (effect of environment）, The Japan Society of Mechanical Engineers Kansai Branch 93 period regular meeting/ conference（Research discussion session）, 2018.3
  • Kaname KISHIMOTO, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: Evaluation of interfacial crack initiation strength from free-edge in micro-scale Si/Cu components（effect of hydrogen）, The Japan Society of Mechanical Engineers Kansai Student Association Heisei 29 Graduation Research Presentation Lecture , 2018.3 ※Best Presentation Award Winner
  • Hiroki NAKANO, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: High-cycle fatigue properties of precipitation hardened Al-Cu-Mg alloy containing excess Mg , The Japan Society of Mechanical Engineers Kansai Student Association Heisei 29 Graduation Research Presentation Lecture, 2018.3

2016

  • Kazuya AIHARA, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: Evaluation of strength against interfacial crack initiation from free-edges in Si/Cu micro-componets（effect of free-edge shape）, The Japan Society of Mechanical Engineers Kansai Branch 92 period regular meeting/ conference（Master's research presentation session）, 2017.3
  • Ryo ASANO, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: Evaluation of grain boundary hydrogen embrittlement using a single grain boundary specimen, The Japan Society of Mechanical Engineers Kansai Branch 92 period regular meeting/ conference（Master's research presentation session）, 2017.3
  • Shuzaburo KITA, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: High-cycle fatigue strength properties of A6061-T6-based new All alloys (effect of temperature）, The Japan Society of Mechanical Engineers Kansai Branch 92 period regular meeting/ conference（Master's research presentation session）, 2017.3
  • Hironari NISHIOKA, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: Investigation on the influence of solute Mg on static/fatigue strength of precipitation-hardened Al-Cu-Mg alloy, The Japan Society of Mechanical Engineers Kansai Branch 92 period regular meeting/ conference（Master's research presentation session）, 2017.3
  • Itaru ASHIDA, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: Evaluation of interfacial crack initiation strength from free-edges in micro-scale SiN/Cu components (effect of specimen shape) , The Japan Society of Mechanical Engineers Kansai Branch 92 period regular meeting/ conference（Mechanical vocation student research presentation session），2017.3
  • Ryosuke KURIKI, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: High-cycle fatigue properties of A6061-T6-based new Al alloy (effect of environment) , The Japan Society of Mechanical Engineers Kansai Branch 92 period regular meeting/ conference（Mechanical vocation student research presentation session），2017.3
  • Masaki KASHIHARA, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: High-cycle fatigue properties of A6061-T6-based new Al alloy (effect of environment) , The Japan Society of Mechanical Engineers Kansai Student Association Heisei 28 Graduation Research Presentation Lecture, 2017.3
  • Jun KURIHARA, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: High-cycle fatigue strength properties of A6061-T6-based new All alloys (effect of temperature）, The Japan Society of Mechanical Engineers Kansai Student Association Heisei 28 Graduation Research Presentation Lecture, 2017.3 ※Best Presentation Award Winner

2015

  • Takuya WADA, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: Gaga-cycle fatigue properties of A6061-T6-based new Al alloy (effect of environment) , The Japan Society of Mechanical Engineers Kansai Branch 91 period regular meeting/ conference（Master's research presentation session）, 2016.3
  • Kazuya AIHARA, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: Evaluation of strength against interfacial crack initiation from free-edges in micro-componets（effect of free-edge shape）, The Japan Society of Mechanical Engineers Kansai Branch 91 period regular meeting/ conference（Mechanical vocation student research presentation session），2016.3
  • Shuzaburo KITA, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: Static and fatigue strength properties of A6061-T6-based new Al alloys, The Japan Society of Mechanical Engineers Kansai Branch 91 period regular meeting/ conference（Mechanical vocation student research presentation session）, 2016.3
  • Itaru ASHIDA, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: Evaluation of interfacial crack initiation strength from free-edges in micro-scale SiN/Cu components (effect of specimen shape) , The Japan Society of Mechanical Engineers Kansai Student Association Heisei 27 Graduation Research Presentation Lecture, 2016.3
  • Ryosuke KURIKI, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH, Tomohiro SATO: High-cycle fatigue properties of A6061-T6-based new Al alloy (effect of environment）, The Japan Society of Mechanical Engineers Kansai Student Association Heisei 27 Graduation Research Presentation Lecture, 2016.3 ※Best Presentation Award Winner

2014

  • Hikaru KONDO, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH:In situ fracture experiment of a single grain boundary using an environmental TEM, The Japan Society of Mechanical Engineers Kansai Branch 90 period regular meeting/ conference（Master's research presentation session）, 2015.3
  • Ryo ASANO, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH: The Japan Society of Mechanical Engineers Kansai Student Association Heisei 26 Graduation Research Presentation Lecture, 2015.3
  • Hironari NISHIOKA, Yoshimasa TAKAHASHI, Masanori TAKUMA, Takahiro SHIKAMA, Hiroshi NOGUCHI: Evaluation of grain boundary hydrogen embrittlement using a single grain boundary specimen, The Japan Society of Mechanical Engineers Kansai Student Association Heisei 26 Graduation Research Presentation Lecture, 2015.3

2013

  • Ryota NAKAMICHI, Yoshimasa TAKAHASHI, Masanori TAKUMA, Takahiro SHIKAMA, Hiroshi NOGUCHI: Rmergence of fatigue limit in A6061-T6 alloy under ultrasonic fatigue test, The Japan Society of Mechanical Engineers Kansai Branch 89 period regular meeting/ conference（Master's research presentation session）, 2014.3
  • Yuji KAWATA, Yoshimasa TAKAHASHI, Masanori TAKUMA, Takahiro SHIKAMA, Hiroshi NOGUCHI: Effect of additional elements on high cycle fatigue properties of high strength aluminium alloy, The Japan Society of Mechanical Engineers Kansai Student Association Heisei 25 Graduation Research Presentation Lecture, 2014.3
  • Masaru KITAGAWA, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH: Evaluation of strength against interfacial crack initiation from free-edges in micro-components, The Japan Society of Mechanical Engineers Kansai Student Association Heisei 25 Graduation Research Presentation Lecture, 2014.3
  • Takuya WADA, Yoshimasa TAKAHASHI, Masanori TAKUMA, Takahiro SHIKAMA, Hiroshi NOGUCHI: Fatigue limit mechanism of a high strength aluminium alloy in giga-cycle regime, The Japan Society of Mechanical Engineers Kansai Student Association Heisei 25 Graduation Research Presentation Lecture, 2014.3

2012

  • Hiroaki YOSHITAKE, Yoshimasa TAKAHASHI, Masanori TAKUMA, Takahiro SHIKAMA, Hiroshi NOGUCHI: Very high cycle fatigue properties of new aluminium alloy bearing strain aging capability, The Society of Materials Science, Japan 61 Period Regular Meeting/ Academic Lecture，2012.5
  • Hiroaki YOSHITAKE, Yoshimasa TAKAHASHI, Masanori TAKUMA, Takahiro SHIKAMA, Hiroshi NOGUCHI: Very high cycle fatigue properties of new aluminium alloy bearing strain aging capability, The Society of Materials Science, Japan 31 period fatigue symposium，2012.11
  • Keiichi UEDA, Toshihiro ODA, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH: Strength property of creep crack initiation at interface edge, The Japan Society of Mechanical Engineers Kansai Branch 88 period regular meeting/ conference（Master's research presentation session）, 2013.3
  • Toshihiro ODA, Keiichi UEDA, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH: Strength property of time-dependent interfacial crack initiation from free-edge in a epoxy/ metal butt joint, The Japan Society of Mechanical Engineers Kansai Student Association Heisei 24 Graduation Research Presentation Lecture, 2013.3 ※Best Presentation Award Winner
  • Hikaru KONDO, Yoshimasa TAKAHASHI, Masanori TAKUMA, Ken-ichi SAITOH: Fracture strength property of single-crystalline silicon micro components processed by focused ion beam, The Japan Society of Mechanical Engineers Kansai Student Association Heisei 24 Graduation Research Presentation Lecture, 2013.3